Sample Collection Instructions

Please Note--Read this entire sheet before you begin your specimen collection. Scraping should be before eating or drinking, or at least an hour after eating and drinking. Avoid warm or hot fluids before scraping.

1. We have supplied 2 swab kits and collection tubes to insure accuracy.
2. The number on your tube should correspond to the number on your Release Form and the plastic bag.
3. With clean hands carefully open the plastic wrapper without damaging the scraper. Keep the plastic bag that has your kit number to put the tubes back after the collection.
4. Using one cheek scraper, scrape forcefully inside the cheek many times (about 60 seconds). A great scrape gives us a great sample! A weak scrape will yield less DNA and may cause several weeks delay.
5. Remove the small specimen tube marked with your kit number. Unscrew the top and gently push on the plunger at the top of the applicator stick, ejecting the scraper into the tube, just under the soapy solution. (Please do not jam the scraper to the bottom of the tube…it is difficult to retrieve)!
6. Remove the plastic applicator handle, leaving the scraper tip in the tube. Twist the cap onto the tube securely. The tube must be shut tightly to insure the quality of your sample. The tube with the scraper tip inside should be left at room temperature. However, it will not be harmed by winter or summer temperatures when sent by regular mail.
7. Wait 8 hours and repeat steps 4 to 6 using the second scraper and the tube marked with your kit number.
8. Put the tubes inside the plastic bag that has your kit number and seal it. Insert the plastic bag and the release form in the self-addressed envelope provided, and call us. Our courier will collect the sample from you.